Ass Savers Win Wing 2 Road
Introducing the WIN WING 2
The smartest clip-on gravel mudguard on the market just got even better! Win Wing 2 features an all new upgraded wishbone that can take even more beating than before and because we care about your bike as much as our own, we included bomb proof transparent protection patches with every fender so that even the most delicate frame will stay pristine. And as if that wasn't enough, we even listened to your feedback and bowed down to the most common request about the Win Wing 1 - Make it black!Ā
- Full backside rider protection from the knee and up
- Reinforced patent pending wishbone technology
- AttachesĀ in seconds toĀ every bike, requires no tools
- Including frame protection stickers
- Suitable for tire widths up to 35 mm
Technical data
Measures:Ā 375 x 65 mm
Weight:Ā 64 g
Material: Blade - 0.9 mm PP (Polypropylene), Wishbone holder - glassfiber reinforced PA (Polyamid or Nylon) and Strap - TPU (thermoplastic polyurethane).
Tangential CoverageĀ Ā
The key to understanding how the Win Wing works lies in physics: water and mud leave the wheel in a straight line from the tangential point of release. By shielding only theĀ upper rear quarterĀ of the wheel, the Win Wing eliminates spray from reaching the critical areas of the riderĀ with a minimum of material.
Mount right, mount tightĀ
For the Tangential Coverage to work properly, the mudguard needs to be installed very close to the wheel. Aim for 5-10 mm tire clearance for maximum coverage.Ā
The right angle
Just as important as a tight fit is the angle of the blade. There are three different settings to compensate for the angle of your seat stays. Choose the one that allow a horizontal or a tail-up position. Avoid a tail-down angle as this will reduce Ā the efficiency of the fender.
Strap it hard
The straps are made from ultra-tough TPU and should be pulled as tight as you can comfortably do by hand. If you experience that the mudguard is not stable, try to use the next hole in the strap.
Protect what you love
WeĀ have madeĀ the Win Wing as kind to your bike as possible with soft rubber feet that gently hugs your frame. However, anything that is strappedĀ toĀ your bike for a longer period of time will leave marks. If you are very keen on maintaining that new bike look, please remember to install protective tape where your Win Wing is attached.
Anti-JamĀ
As sturdy as it is, the design of the Win-wing allows it to flex in case of an accident and it's constructed to not jam in case of large chunks of nature get stuck to your wheel.
Anti-Theft
If you like to keep it attached to your bike permanently, the Win-Wing can be secured to your bike with a standard zip tie, through a designated slot, making it easier to resist for people with sticky fingers.
Reliable
Thanks to it's sophisticated simplicity and careful choice of materials, the Win-Wing is virtually indestructible. With onlyĀ fourĀ components (competitors use as much as 40 components) it's not that much that can go wrong. The glassfiber reinforced wishbone holderĀ is both flexible and tough and the rubber straps are virtually indestructible.
Pre-folding
The secret to transforming a flat piece of plastic into a functioningĀ mudguardĀ lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Ass Savers Win Wing 2 Road
Ass Savers Win Wing 2 Road
Introducing the WIN WING 2
The smartest clip-on gravel mudguard on the market just got even better! Win Wing 2 features an all new upgraded wishbone that can take even more beating than before and because we care about your bike as much as our own, we included bomb proof transparent protection patches with every fender so that even the most delicate frame will stay pristine. And as if that wasn't enough, we even listened to your feedback and bowed down to the most common request about the Win Wing 1 - Make it black!Ā
- Full backside rider protection from the knee and up
- Reinforced patent pending wishbone technology
- AttachesĀ in seconds toĀ every bike, requires no tools
- Including frame protection stickers
- Suitable for tire widths up to 35 mm
Technical data
Measures:Ā 375 x 65 mm
Weight:Ā 64 g
Material: Blade - 0.9 mm PP (Polypropylene), Wishbone holder - glassfiber reinforced PA (Polyamid or Nylon) and Strap - TPU (thermoplastic polyurethane).
Tangential CoverageĀ Ā
The key to understanding how the Win Wing works lies in physics: water and mud leave the wheel in a straight line from the tangential point of release. By shielding only theĀ upper rear quarterĀ of the wheel, the Win Wing eliminates spray from reaching the critical areas of the riderĀ with a minimum of material.
Mount right, mount tightĀ
For the Tangential Coverage to work properly, the mudguard needs to be installed very close to the wheel. Aim for 5-10 mm tire clearance for maximum coverage.Ā
The right angle
Just as important as a tight fit is the angle of the blade. There are three different settings to compensate for the angle of your seat stays. Choose the one that allow a horizontal or a tail-up position. Avoid a tail-down angle as this will reduce Ā the efficiency of the fender.
Strap it hard
The straps are made from ultra-tough TPU and should be pulled as tight as you can comfortably do by hand. If you experience that the mudguard is not stable, try to use the next hole in the strap.
Protect what you love
WeĀ have madeĀ the Win Wing as kind to your bike as possible with soft rubber feet that gently hugs your frame. However, anything that is strappedĀ toĀ your bike for a longer period of time will leave marks. If you are very keen on maintaining that new bike look, please remember to install protective tape where your Win Wing is attached.
Anti-JamĀ
As sturdy as it is, the design of the Win-wing allows it to flex in case of an accident and it's constructed to not jam in case of large chunks of nature get stuck to your wheel.
Anti-Theft
If you like to keep it attached to your bike permanently, the Win-Wing can be secured to your bike with a standard zip tie, through a designated slot, making it easier to resist for people with sticky fingers.
Reliable
Thanks to it's sophisticated simplicity and careful choice of materials, the Win-Wing is virtually indestructible. With onlyĀ fourĀ components (competitors use as much as 40 components) it's not that much that can go wrong. The glassfiber reinforced wishbone holderĀ is both flexible and tough and the rubber straps are virtually indestructible.
Pre-folding
The secret to transforming a flat piece of plastic into a functioningĀ mudguardĀ lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
Original: $29.03
-65%$29.03
$10.16Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Introducing the WIN WING 2
The smartest clip-on gravel mudguard on the market just got even better! Win Wing 2 features an all new upgraded wishbone that can take even more beating than before and because we care about your bike as much as our own, we included bomb proof transparent protection patches with every fender so that even the most delicate frame will stay pristine. And as if that wasn't enough, we even listened to your feedback and bowed down to the most common request about the Win Wing 1 - Make it black!Ā
- Full backside rider protection from the knee and up
- Reinforced patent pending wishbone technology
- AttachesĀ in seconds toĀ every bike, requires no tools
- Including frame protection stickers
- Suitable for tire widths up to 35 mm
Technical data
Measures:Ā 375 x 65 mm
Weight:Ā 64 g
Material: Blade - 0.9 mm PP (Polypropylene), Wishbone holder - glassfiber reinforced PA (Polyamid or Nylon) and Strap - TPU (thermoplastic polyurethane).
Tangential CoverageĀ Ā
The key to understanding how the Win Wing works lies in physics: water and mud leave the wheel in a straight line from the tangential point of release. By shielding only theĀ upper rear quarterĀ of the wheel, the Win Wing eliminates spray from reaching the critical areas of the riderĀ with a minimum of material.
Mount right, mount tightĀ
For the Tangential Coverage to work properly, the mudguard needs to be installed very close to the wheel. Aim for 5-10 mm tire clearance for maximum coverage.Ā
The right angle
Just as important as a tight fit is the angle of the blade. There are three different settings to compensate for the angle of your seat stays. Choose the one that allow a horizontal or a tail-up position. Avoid a tail-down angle as this will reduce Ā the efficiency of the fender.
Strap it hard
The straps are made from ultra-tough TPU and should be pulled as tight as you can comfortably do by hand. If you experience that the mudguard is not stable, try to use the next hole in the strap.
Protect what you love
WeĀ have madeĀ the Win Wing as kind to your bike as possible with soft rubber feet that gently hugs your frame. However, anything that is strappedĀ toĀ your bike for a longer period of time will leave marks. If you are very keen on maintaining that new bike look, please remember to install protective tape where your Win Wing is attached.
Anti-JamĀ
As sturdy as it is, the design of the Win-wing allows it to flex in case of an accident and it's constructed to not jam in case of large chunks of nature get stuck to your wheel.
Anti-Theft
If you like to keep it attached to your bike permanently, the Win-Wing can be secured to your bike with a standard zip tie, through a designated slot, making it easier to resist for people with sticky fingers.
Reliable
Thanks to it's sophisticated simplicity and careful choice of materials, the Win-Wing is virtually indestructible. With onlyĀ fourĀ components (competitors use as much as 40 components) it's not that much that can go wrong. The glassfiber reinforced wishbone holderĀ is both flexible and tough and the rubber straps are virtually indestructible.
Pre-folding
The secret to transforming a flat piece of plastic into a functioningĀ mudguardĀ lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
